Here is the list of examples in this release. 3rd Party Applications.
Lists the activities to create a new project and create the floor plan
Add a Domain 3000 to a simple floor plan
Add a Lutron Homeworks lighting system and two lights
Simulate turning them on and off in with the Browser GUI
Change the Scene Settings
Change the Behavior
View the activity in Check My Destiny
Add a Lutron keypad
Add a fireplace, fans, curtain, sprinklers, and an electric door strike
Add some Lutron CCO relays
Create a theater consisting of a Satellite receiver with built-in PVR, DVD player, surround receiver, DLP TV, 5.1 speakers
Auto generate a block diagram, Browser GUI, and hand held remote
View the activity in Check My Destiny
Create a Distributed TV and Music system consisting of an AM/FM tuner, MP3 player, AV switch, and 4 TVs
Add a Global Cache to add additional serial ports
Connect the surround receiver output of the theater into the distributed TV and music system
Auto generate a block diagram and Browser GUI
View the activity in Check My Destiny
Add a second TV to the Living room for watching the news
Use the entertainment "Preferences" to set the Path
But the Question is, "How is the Volume Controlled: by the TV or by the Denon?"
Create a GUI button for watching the news using a group of actions
Configure the remote control to for watching the news
Add the AM/FM turner to the AV surround receiver - it requires a "splitter"
Use entertainment "Preferences" to select the path to the right speakers
Watch sports on the big TV while listening to the sound from the AM / FM tuner
Add an IP Camera to the Front Porch
Open the IP camera
Change the keypad at the front door to be a Homeworks seeTouch 7B
Arm the security system with button 7
Control the Outdoor Front Yard lights with the Living room keypad
Copy the Living room front door keypad to the keypad over the Kitchen sink
Use button 7 of the other Living room keypad to toggle the fireplace on and off.
Create a keypad sequence of button presses to disarm the security system
Create a Group of Actions to Disarm the Security System
Set the Front Yard to Normal scene from 1 hour after sunset to 11pm (randomized by 10 minutes) every day forever
Create a "Wake up" group of actions including:
Setting the temperature to 72 degrees in the master bedroom area 10 minutes before the alarm goes off
Turning MP3 music on in the Master bedroom when the alarm goes off
Setting the Room scene to Normal in the Master bedroom when the alarm goes off
Opening the curtains in the Living room when the alarm goes off
Setting the alarm for 7am on weekdays
We have already added a GUI Button to turn on the news
Create a "Good Night" GUI Button to:
Turn of the inside lights, entertainment and all devices
Arm the alarm
Set back the temperature
We have already added a GUI Button to turn on the news
Create a "Good Night" GUI Button to:
Turn of the inside lights, entertainment and all devices
Arm the alarm
Set back the temperature
Add the HPS network of sensors
Add Shubs
Add the Entry/Exit sensors to the exterior perimeter
Add contacts
Add Entry/Exit sensors to interior doors and invisible walls
Add Area sensors
Initialize the home for handsfree automation
Only turn on the Lights at Night
Enable Follow-me Music and TV
Set up Sleeping Mode in the Bedrooms
Create Scene Discontinuations for Path Scene
Disable Automation in the Bedrooms
Disable Automation for HVAC