Destiny Networks offers two different software
downloads.
"Ubiquity" is the application
you want to download and install on your computer if you want to:
Please
do not upgrade Domain 3000 controllers that have the slot for the Flash
memory on the back.
Note that you will need the user name and password to our web site to
download this application. If you need help, please contact
us. It may be best to print out the instruction
from our web site for upgrading the software, but please at least make
sure you follow these steps:
Install the software on your PC.
Before upgrading the Domain 3000, use the Design
Module to save your project to your PC (using "File / Save as").
From Find My Destiny, select "File / Update
Controller".
You may have to answer "yes" to a security
question.
Note that the menu titled "Updating ..."
will remain on your PC for up to 2
minutes after you cycle the power on the Domain 3000 without giving
you any indication that the upgrade is in progress (because the Domain
Controller is rebooting). In the rare case that it takes longer, please
power cycle the Domain 3000 and Update again.
After Find My Destiny shows the Domain 3000 as
"Browser interface up and running", then, use the Design Module
to save the project back down to the Domain 3000.
Download
Ubiquity 3.3.0 (for integrators) Recommended
(156
MB)
Download
Ubiquity 3.2.3 (for integrators) (156 MB)
Download
Ubiquity 3.2.2 (for integrators) (156 MB)
3.2.2 is the same as 3.2.3 except if you
have to down grade from 3.3.0 in which case you must use 3.2.3 only.
Download
Ubiquity 3.1.1 (for integrators) no longer recommended (136 MB)
"Find
My Destiny" is a small application whose sole purpose is to find
a Domain Controller and open up a Browser GUI to it. The Find My Destiny
application CANNOT be used to upgrade the software on a Domain Controller.
More importantly, you cannot install this application on a computer on
which you intend to install the full set of Ubiquity software.
|