To add the Electronic Energy Controls AR-16
Relay controller, please do the following:
|
Select
the More Ports Layer
Select the "More Ports" layer of
the Design Module. |
|
Add
the AR-16 Relay Controller
Click in the location in the room in which
you plan to add the additional ports.
|
|
You will get a pop up menu like the one at
the right.
From the "Type" dropdown box, select
"Relay Control Unit.
|
|
The menu will change to look like the one
at the right.
From the "Make" dropdown box select
"AR-16 Relay Control Unit". |
|
Give the relay controller a name that pertains
to its function (e.g., Windows for relays that will open and close windows).
Select the
RS232 "Serial Protocol".
Select the serial port.
Click OK.
|
|
After adding the Relay Controller, a red dot
will appear where you initially clicked to add it. If you want to change
any of the parameters of that Relay Controller, click on the red dot and
make sure the "Edit Relay Controller Unit" menu pops up. It
is the one that also has a "Delete" button on it - otherwise,
you will be adding a second Relay Controller.
Now these relays are available for:
|
|